Senseca IP65 KIT / FCM Cap DIN-43650-B - PG9 00.1123.0026 Seal Mounting Screw

Senseca products, including Senseca IP65 KIT / FCM Cap DIN-43650-B - PG9 00.1123.0026 Seal Mounting Screw, are sourced through parallel import channels and delivered to our customers worldwide with speed and reliability. Even if Senseca IP65 KIT / FCM Cap DIN-43650-B - PG9 00.1123.0026 Seal Mounting Screw is not listed on our website, you are welcome to request a price quote — our team will respond promptly with a tailored offer.FLOWFCMFlow switchGENERAL CHARACTERISTICS The flow switch FCM was built to enable a simple control of the flowrate and a fast signal in the absence of flow.The electrical part is physically separate from the mechanical and the contact is magnetically actuated. The electric head has abayonet fixing system and, in case of necessity, can be replaced without removing the instrument from its installation.● ● ● ● ●No calibration needed.Easy replacement of the electrical contact.Low pressure loss.Versions for both vertical and horizontal operation.Can be used both with liquids and gases.GVVertical mounting with flow direction from bottom to top.GOHorizontal or vertical mounting with flow direction from bottom to topTECHNICAL DATATab.1Body Process connection Sensor Accuracy Max. Temperature Pressure loss Max. Flow rateMax. pressureHexagonal bar Brass ½’’ Gas-M - UNI 228/1 Piston PP ± 15% of setting value90°C 0,5 bar with max. flow rate 25 l/min All ranges 250 bar (*) VerticalHorizontal 170 gMounting WeightDIMENSIONSmm.Code 15 GV GO -(*) Higher pressures on request.AVAILABLE SETTINGS GV Settings l/min Nominal ON 0,8 0,8 1 1,1 1,5 1,7 2 2,12,5 2,6 3 3,2Tab.2 GO Settings l/min Nominal ON 2,5 2,8 3 3,3 4 4,2 5 5,2 6 6,3 7 7,4OFF 0,7 1 1,6 2 2,4 3,1OFF 1,7 2 2,9 3,2 4,1 4,4ELECTRICAL DATA Reed contact Reed contact data ConnectionN.6 5 1 2 3 4Tab.3 N.O.300 Vac FastonNo flow rate 70 VA 0,5 A 6,3 mm.DIN plug protection IP65 On request The DIN cap is supplied in a separate kitKITINSTALLATION AND MAINTENANCE Drain the hydraulic circuit before installation. Do not mount theswitch in direct contact with ferromagnetic surfaces.Proceed with the assembly, taking care to use only a hexagonal wrench for fixing metal fittings.In case of electrical failure replace the electrical head making sure of the happened hooking bayonet.NOMENCLATUREFCM 3 ●2,515 GV● ● KIT/FCM We reserve the right to change the data without noticeTab.2 Tab.2 Tab.1 Tab.3Name + N. of setting Nominal setting l/min Process connection + Type of installationDIN cap optional mounting kit BE#040/8-03/2010153