Senseca NM-007HP Level Switch Nm

Level Switch NM-007HPSwitching current Switching capacity Protection class Ingress protectionElectrical connection Materials medium-contact Non-mediumcontact materialsWeight Installation locationmax. 0.5 A max. 10 VA 2 - safety insulationIP 65 cable 1.5 m PP PA, PVC 0.04 kg vertical installation positionDimensions ● Cover or base mounting for monitoring max. or min. level ● Normally closed or normally open contactCharacteristics Mechanical level monitor for fluid media, with contact-free triggeringof a reed contact.Technical data Switch Process connection Density of medium Pressure resistanceMedium temperature Ambient temperature Media Wiringreed switch male thread Pg 7 0.8 g/cm3PN 5 bar -20..+60 °C -20..+60 °C water, oil 'normally open' or 'normally closed'No. 0.442Details of float location 17 mm for density1 g/cm3.The device is delivered without a seal.Handling and operation ● It must be ensured that the values given for voltage, current,and power are not exceeded.● When switched on, a load must be connected in series.● The electrical details apply to ohmic loads.Capacitive, inductive and lamp loads must be operated using a protective circuit.● Not suitable for use in media with ferritic particles.Ordering code 1.NM - 0071 1 2 2 The switching function can be modified by changing the float.Switching voltage max. 230 V ACdsh_fam_nm-007hp_en_vs01 V1.01-012.3.HP1. Connection size 007 threaded connection Pg 72. Process connection H screw-in thread3. Connection material P PP1