Senseca HR1MV-040GM100A-950355 Flow Switch

Flow Switch HR1MVWeight Installation locationsee table "Dimensions and weights" Standard: horizontal inwards flow from theleft; other installation positions are possible;the installation position affects the switching point and range.Ranges For switching ranges, the details in the table correspond to horizontal inwards flow and decreasing flow rate; for display rangesthey correspond to horizontal inwards flow and increasing flow rate.Mechanical flow switch, for fluid media, with spring-supported piston and magnetic triggering of a reed switch. Robustconstruction in brass or stainless steel.Switching range Display range l/min l/min H2O or oil H2O or oil 2 30..200 mm /s30..200 mm2/s 2 - 12 2 - 15 5 - 20 5 - 25 10 - 40 10 - 45 20 - 60 20 - 6530 - 100 30 - 110 50 - 150 50 - 160 100 - 200 100 - 220 Special ranges are available.Technical dataDimensions and weights● Viscosity stabilised from 30 to 200 mm²/s ● High switching power ● Solid constructionCharacteristicsSwitch Nominal width Process connection Switching range Qmax.Tolerance Pressure resistance Media temperature Ambient temperature MediaWiringreed switchDN 32..50 female thread G 11/4..G 2 (further process connections available onrequest) 2..220 l/min for details see table "Ranges" to 250 l/min ±5 % of the full scale value plus viscosityvariationPN 200 barMaterials medium-contactNon-mediumcontact materials32 40 50TypesG 11/4 HR1MV-0032G.G 11/2 HR1MV-0040G.G2 HR1MV-0050G.50 60 100 150 200 230 250LSWX165 165 1507029-26Weight kg 6.0 5.7 5.2-20..+120 °C with display Z -20..+70 °C -20..+70 °C water, oils (gases and aggressive mediaavailable on request) changeover No. 0.227brown Switching voltage Switching current Switching capacity Protection classIngress protection Electrical connectionDN GQmax.recommendedblue blackmax. 250 V AC max. 1.5 A max. 50 VA 2 - safety insulationIP 65 cable 2.5 m, optionally plug DIN 43650-A / ISO 4400 or for round plug connector M12x1, 4-poleBrass construction:Stainless steel CW614N nickelled, construction: 1.4571, CW614N, 1.4310, 1.4404, 1.4310, hardhard ferrite ferrite PTFE-coated,DN 32..40: NBRDN 32..40: FKM steel coated with Rilsal, CW614N, NBRpi-ho_fki-hr1mv_e V1.05-01Additional weights for options Display O0.10 kg1