Nortek C03 IP Inverter Hydraulic

Centralized greasing systems » ReverserIt is used for switching lines into double line lubrication systems of grease or oilRobust body made of steel External zinc-plated protection Different possibilities of controlAdjustable pressure rangeThe overpressure reversers are especially useful equipment in double grease lines to have automated alternateoperation of both lines. The equipment automatically pressurizes or relieves the lubricant flow from one line tothe other depending on the predetermined pressure.Design and operating principle These overpressure reversers are mechanically actuated and specially designed for double line systems ofmedium length. Overpressure reverser works very similar to a two ways- two ports valve. If the pressure in thework line reaches the set pressure, an internal overpressure valve will open and command a piston to actuateagainst the other two pistons, one of them will switch the work line.Schematic drawing without controlSchematic drawing with control detectorInstallation To ensure a correct operation, the location of the overpressure reverser in the installation must be at thebeginning of the grease line, at the pump outlet.Flow Maximum working pressure Minimum working pressure Inlet / Outlet connectionsMounting position Body Weight without baseplate Weight with baseplate Dimensions without baseplateDimensions with baseplate Qualities3 kg/h 300 bar 40 bar G 3/8 female Variable Steel EN10087 – 11SMnPb30 zinc-plated2,5 kg 3,9 kg 156x70x80 mm 156x100x80 mm Electroplated coating of zinc ISO 2081 – Fe/Zn12/A