Nederlands
Eaton logo

Eaton

1.070 products

View products →

Eaton

Eaton is a leading American-Irish multinational for power management technology, active in hydraulics, electrical components, aerospace and vehicles. Eaton supplies hydraulic filters, filter elements, pressure switches, level switches and electrical switchgear technology for heavy industrial applications, mobile hydraulics and process industries. With a catalog of 1,069 products, Eaton offers reliable solutions for hydraulic filtration, power distribution and system protection. Eaton is ISO 9001 certified and supported by a worldwide service and knowledge network.

Eaton hydraulic filter elements are the core products in the range. The 950-series and 175-series filter elements (VG version) are designed for high-pressure hydraulic systems up to 420 bar working pressure. Filter ratings are available from 3 to 40 micron (Beta values β3=1000 to β25=200) conforming to ISO 16889 multi-pass test standard. Fiberglass filter media delivers superior dirt-holding capacity and longer service life compared to paper filter elements. Versions with anti-drain-back valve are available for installations where the system must not drain down when stopped. The VG (Vitesse Glass) filter media offers superior filtration efficiency compared to cellulose filter elements.

Eaton pressure switches (SG-series) and level switches monitor pressure in hydraulic tanks, pressure lines and filter elements. The SG307 and SG350 series are available as NC (normally closed) or NO (normally open) switches for use in alarm switches, safety switches and filter element replacement indicators. Switching contacts up to 250V AC 15A are standard for direct switchgear integration.

Besides hydraulic products, Eaton also supplies electrical power management components including motor starters, soft starters, overload relays, switchgear components and UPS systems for continuous power supply. Eaton circuit breakers, contactors and motor starter combinations are available for motors from 0.75 kW to 1,000 kW in low-voltage installations. For hydraulic systems operating with lubricating oils, hydraulic fluids, and transmission fluids, Eaton filter elements are the most reliable choice for achieving ISO cleanliness classes.

Verkopershulp.nl offers the complete Eaton range of 1,069 products, including hydraulic filter elements in various versions, seals, O-rings, and related components for maintenance of hydraulic filtration systems. At Verkopershulp.nl we provide technical advice on the correct Eaton filter element selection for your hydraulic system based on system pressure, viscosity, required filter fineness, and ISO cleanliness class.

History

Eaton Corporation was founded in 1911 by Joseph O. Eaton in Bloomfield, New Jersey, USA, as a manufacturer of truck rear axle drives. The company grew rapidly through acquisitions and diversification throughout the 20th century into a global industrial conglomerate spanning hydraulics, electrical components, and aerospace. Vickers Incorporated, founded in 1922 and a pioneer in hydraulic pump and valve technology, was acquired by Eaton in 1999 and became the backbone of Eaton's hydraulic filtration product line. The acquisition of Cutler-Hammer expanded Eaton's presence in electrical power management, motor control and switchgear. Aeroquip and Dana Hydraulics further strengthened the fluid power portfolio. Eaton relocated its corporate headquarters to Dublin, Ireland in 2012 following the merger with Cooper Industries. Today Eaton employs more than 85,000 people, generates annual revenues exceeding 20 billion USD, and operates in more than 175 countries worldwide.

Product Categories

  • Actuator
  • Brake
  • Cable
  • Check Valve
  • Circuit Breaker
  • Clutch
  • Connector
  • Control Panel
  • Control Valve
  • Controller
  • Coupling
  • Display & Indicator
  • Drive
  • Fan & Blower
  • Filter
  • Hydraulic Pump
  • Module
  • Motor
  • Piston
  • Power Supply
  • Pump
  • Regulator
  • Relay
  • Safety Valve
  • Seal & Gasket
  • Sensor
  • Solenoid Valve
  • Switch
  • Temperature Sensor
  • Transformer
  • Valve

Applications

  • Hydraulic filtration in mobile equipment (cranes, excavators)
  • Filter monitoring in stationary hydraulic systems
  • Pressure monitoring in high-pressure hydraulic lines
  • Motor protection in pump and compressor installations
  • Electrical protection in production automation installations
  • Hydraulic system protection in steel industry and press technology
  • Power distribution in industrial switchgear panels
  • Continuous power supply for critical process equipment
  • Motor starting in water pumps and air compressors
  • Filter media for hydraulic presses and injection molding machines
  • Power management in data center and telecom installations
  • Hydraulic filtration in offshore and marine applications

Frequently Asked Questions

What are the filtration ratings of Eaton VG-series filter elements?
Eaton VG-series filter elements are available with filtration ratings from 3 to 40 micron absolute, conforming to ISO 16889 multi-pass test standard. Beta values range from β3=1000 (highest efficiency) to β25=200 for standard hydraulic applications. Select the filter rating based on the required hydraulic fluid cleanliness for your pumps, control valves and cylinders.
How do I replace an Eaton hydraulic filter element?
Eaton filter elements are replaced by relieving the filter housing of system pressure, opening the housing and replacing the element. Check the type designation on the old element (e.g., 950.25VG.10.S.P) for the exact replacement. After installing the new element, the hydraulic system must be bled to remove air bubbles.
Which Eaton pressure switch suits my hydraulic system?
Eaton SG-series pressure switches are available for pressure ranges from 5 to 700 bar and for temperatures from -40°C to +120°C. The SG307 series is suitable for standard industrial hydraulic applications; the SG350 series is available for ATEX-certified environments. Switching contacts up to 250V AC 15A are standard for direct PLC or relay integration.
Are Eaton filter elements compatible with other manufacturers' filter housings?
Eaton filter elements are available in standard versions compatible with filter housings from Hydac, Parker, Pall and other manufacturers, provided the connection dimensions match. The 950-series elements are designed for standard filter housings with SAE flange connection. Check the dimensions (length, outer diameter, connection type) for cross-reference replacement.
Does Eaton supply hydraulic filter elements for low-viscosity fluids?
Yes, Eaton supplies special filter elements for low-viscosity fluids such as water-glycol, synthetic fluids and fire-resistant hydraulic fluid (HFA, HFB, HFC types). The material composition of the filter medium is adapted to fluid compatibility. Consult Verkopershulp.nl for the correct element selection with non-standard hydraulic fluids.
Which Eaton soft starter suits my electric motor?
Eaton soft starters are available for motors from 3 kW to 1.4 MW at 400V/690V voltage range. Select the soft starter based on the motor current (A), starting torque and ambient temperature. Eaton DS7 and DE1 soft starters provide electronic starting torque adjustment, thermal motor protection and process diagnostics via digital communication interfaces.
Does Verkopershulp.nl offer technical support for Eaton products?
Yes, Verkopershulp.nl has technical specialists who support you in selecting Eaton filter elements, pressure switches and electrical power components. We advise on filtration rating, element sizing, cross-reference replacement and selection of electrical protection components for your installation.